Publications


Liquid metal MHD research at KIT: Fundamental phenomena and flows in complex blanket geometries
Bühler, L.; Brinkmann, H.-J.; Courtessole, C.; Klüber, V.; Koehly, C.; Lyu, B.; Mistrangelo, C.; Roth, J.
2024. Fusion Engineering and Design, 200, 114195. doi:10.1016/j.fusengdes.2024.114195
Experimental investigation of MHD flows in WCLL TBM mock-up
Courtessole, C.; Brinkmann, H.-J.; Roth, J.; Bühler, L.
2023. 15th International Symposium on Fusion Nuclear Technology (ISFNT 2023), Las Palmas de Gran Canaria, Spain, September 10–15, 2023
Magneto-convective flows around two differentially heated cylinders
Mistrangelo, C.; Bühler, L.; Brinkmann, H.-J.; Courtessole, C.; Klüber, V.; Koehly, C.
2023. Heat and Mass Transfer, 59 (11), 2005–2021. doi:10.1007/s00231-023-03350-2
Towards the simulation of MHD flow in an entire WCLL TBM mock-up
Mistrangelo, C.; Bühler, L.; Klüber, V.; Koehly, C.
2023. Fusion Engineering and Design, 193, Art.-Nr.: 113752. doi:10.1016/j.fusengdes.2023.113752
Design of a scaled mockup of the WCLL TBM for MHD experiments in liquid metal manifolds and breeder units
Koehly, C.; Bühler, L.; Courtessole, C.
2023. Fusion Engineering and Design, 192, Artkl.Nr.: 113753. doi:10.1016/j.fusengdes.2023.113753
Liquid metal MHD research at KIT: fundamental phenomena and flows in complex blanket geometries
Bühler, L.; Courtessole, C.; Klüber, C.; Köhly, C.; Mistrangelo, C.
2023. 15th International Symposium on Fusion Nuclear Technology (ISFNT 2023), Las Palmas de Gran Canaria, Spain, September 10–15, 2023
Magnetohydrodynamic flow in stepwise bent circular pipes
Bühler, L.; Klüber, V.; Mistrangelo, C.
2022. Magnetohydrodynamics, 58 (4), 425 – 433. doi:10.22364/mhd.58.4.6
Design of a scaled mockup of the WCLL TBM for MHD experiments in liquid metal manifolds and breeder units
Köhly, C.; Bühler, L.
2022. 32nd Symposium on Fusion Technology (SOFT 2022), Dubrovnik, Croatia, September 18–23, 2022
Three-dimensional magnetohydrodynamic phenomena in circular pipe flow. PhD dissertation
Klüber, V.
2023, February 23. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000156159
Geometric optimization of electrically coupled liquid metal manifolds for WCLL blankets
Bühler, L.; Mistrangelo, C.
2023. 30th IEEE Symposium on Fusion Engineering (SOFE 2023), Oxford, United Kingdom, July 9–13, 2023
MHD Flows in Curved Pipes under a Non-Uniform Magnetic Field
Mistrangelo, C.; Bühler, L.
2023. 30th IEEE Symposium on Fusion Engineering (SOFE 2023), Oxford, United Kingdom, July 9–13, 2023
Magnetohydrodynamic flow in stepwise bent circular pipes
Bühler, L.; Klüber, V.; Mistrangelo, C.
2022. Proceedings of the 12th International PAMIR Conference, Fundamental and Applied MHD, Krakow, PL, July 4-8, 2022, 340–345
Magnetohydrodynamic flow in stepwise bent circular pipes
Bühler, L.; Klüber, V.; Mistrangelo, C.
2022. 12th International PAMIR Conference, Fundamental and Applied MHD (2022), Krakow, Poland, July 4–8, 2022
Magnetohydrodynamic flows in strong magnetic fields for application in fusion blankets
Bühler, L.; Courtessole, C.; Mistrangelo, C.
2022. Proceedings of the 12th International PAMIR Conference, Fundamental and Applied MHD, Krakow, PL, July 4-8, 2022, 1, The European Society of Magnetohydrodynamics (EuMHD)
Magnetohydrodynamic flows in strong magnetic fields for application in fusion blankets
Bühler, L.; Courtessole, C.; Mistrangelo, C.
2022. 12th International PAMIR Conference, Fundamental and Applied MHD (2022), Krakow, Poland, July 4–8, 2022
Towards the simulation of MHD flow in an entire WCLL blanket mock-up
Mistrangelo, C.; Bühler, L.; Klüber, V.
2022, September. 32nd Symposium on Fusion Technology (SOFT 2022), Dubrovnik, Croatia, September 18–23, 2022
Magnetohydrodynamics for liquid-metal blankets
Bühler, L.; Brinkmann, H.-J.; Courtessole, C.; Klüber, V.; Köhly, C.; Mistrangelo, C.
2022. Annual Report 2020 of the Institute for Thermal Energy Technology and Safety. Hrsg.: W. Tromm, 5–19, KIT Scientific Publishing
Magnetohydrodynamic velocity and pressure drop in manifolds of a WCLL TBM
Mistrangelo, C.; Bühler, L.; Koehly, C.; Ricapito, I.
2021. Nuclear fusion, 61 (9), Art.-Nr. 096037. doi:10.1088/1741-4326/ac18dc
MHD R&D activities for liquid metal blankets
Mistrangelo, C.; Bühler, L.; Alberghi, C.; Bassini, S.; Candido, L.; Courtessole, C.; Tassone, A.; Urgorri, F. R.; Zikanov, O.
2021. Energies, 14 (20), 6640. doi:10.3390/en14206640
MHD flow in liquid metal blankets: Major design issues, MHD guidelines and numerical analysis
Mistrangelo, C.; Bühler, L.; Smolentsev, S.; Klüber, V.; Maione, I.; Aubert, J.
2021. Fusion engineering and design, 173, Art.Nr.: 112795. doi:10.1016/j.fusengdes.2021.112795
Reconstruction of 3D MHD liquid metal velocity from measurements of electric potential on the external surface of a thick-walled pipe
Bühler, L.; Lyu, B.; Brinkmann, H.-J.; Mistrangelo, C.
2021. Fusion Engineering and Design, 168, Art.-Nr.: 112590. doi:10.1016/j.fusengdes.2021.112590
Magnetohydrodynamics for liquid-metal blankets
Bühler, L.; Brinkmann, H.-J.; Courtessole, C.; Klüber, V.; Köhly, C.; Mistrangelo, C.
2021. Annual Report 2019 of the Institute for Nuclear and Energy Technologies, 7–16, Karlsruher Institut für Technologie (KIT)
Experimental investigation of liquid metal pipe flow in a strong non-uniform magnetic field
Bühler, L.; Brinkmann, H.-J.; Mistrangelo, C.
2020. Magnetohydrodynamics, 56 (2-3), 131–138. doi:10.22364/mhd.56.2-3.4
Reconstruction of 3D fluid velociy and electric potential from measurements on the external surface of a thick-walled pipe
Bühler, L.; Biao, L.; Brinkmann, H.-J.; Mistrangelo, C.
2020. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020
MHD flow in liquid metal blankets: major design issues, numerical analysis and code validation
Mistrangelo, C.; Bühler, L.; Klüber, V.; Smolentsev, S.; Maione, I.; Aubert, J.
2020. 31st Symposium on Fusion Technology (SOFT 2020), Online, September 20–25, 2020
Code-to-Code Comparison for a PbLi Mixed-Convection MHD Flow
Smolentsev, S.; Rhodes, T.; Yan, Y.; Tassone, A.; Mistrangelo, C.; Bühler, L.; Urgorri, F. R.
2020. Fusion science and technology, 76 (5), 653–669. doi:10.1080/15361055.2020.1751378
Three-dimensional magneto convective flows in geometries relevant for DCLL blankets
Mistrangelo, C.; Bühler, L.; Klüber, V.
2020. Fusion engineering and design, 159, Article: 111686. doi:10.1016/j.fusengdes.2020.111686
Numerical simulation of 3D magnetohydrodynamic liquid metal flow in a spatially varying solenoidal magnetic field
Klüber, V.; Bühler, L.; Mistrangelo, C.
2020. Fusion engineering and design, 156, Art.Nr. 111659. doi:10.1016/j.fusengdes.2020.111659
3d tomography analysis of the packing structure of spherical particles in slender prismatic containers
Reimann, J.; Vicente, J.; Ferrero, C.; Rack, A.; Gan, Y.
2020. International journal of materials research, 111 (1), 65–77. doi:10.3139/146.111814
Experimental investigation of liquid metal MHD flow entering a flow channel insert
Bühler, L.; Mistrangelo, C.; Brinkmann, H.-J.
2020. Fusion engineering and design, 154, Article No.111484. doi:10.1016/j.fusengdes.2020.111484
Experimental study of liquid metal magnetohydrodynamic flows near gaps between flow channel inserts
Bühler, L.; Brinkmann, H.-J.; Koehly, C.
2019. Fusion engineering and design, 146 (Part B), 1399–1402. doi:10.1016/j.fusengdes.2018.11.034
Modes of wall induced granular crystallisation in vibrational packing
Dai, W.; Reimann, J.; Hanaor, D.; Ferrero, C.; Gan, Y.
2019. Granular matter, 21 (2), Art. Nr.: 26. doi:10.1007/s10035-019-0876-8
Magnetohydrodynamics for liquid-metal blankets
Bühler, L.; Brinkmann, H.-J.; Klüber, V.; Köhly, C.; Mistrangelo, C.
2019. Annual Report 2017-2018 of the Institute for Nuclear and Energy Technologies. Ed.: T. Schulenberg, 9–18, KIT Scientific Publishing
Experimental Investigation of Liquid Metal Pipe Flow in a Strong Non-Uniform Magnetic Field
Bühler, L.; Brinkmann, H.-J.; Mistrangelo, C.
2019. Proceedings of the 11th PAMIR International Conference, Fundamental and Applied MHD, Reims, F, July 1-5, 2019, 157–161
Experimental Investigation of Liquid Metal Pipe Flow in a Strong Non-Uniform Magnetic Field
Bühler, L.; Brinkmann, H.-J.; Mistrangelo, C.
2019. 11th PAMIR international Conference - Fundamental and Applied MHD (2019), Reims, France, July 1–5, 2019
Considerations on Magneto-Convective Flows in Model Geometries Relevant for Fusion Applications
Mistrangelo. C.; Bühler, L.; Köhly, C.
2019. Proceedings of the 11th PAMIR International Conference, Fundamental and Applied MHD, Reims, F, July 1-5, 2019, 7–11
Considerations on Magneto-Convective Flows in Model Geometries Relevant for Fusion Applications
Mistrangelo, C.; Bühler, L.; Köhly, C.
2019. 11th PAMIR international Conference - Fundamental and Applied MHD (2019), Reims, France, July 1–5, 2019
Numerical Investigation of Liquid Metal Flow in Square Chennels under Inclined Magnetic Fields for Fusion Relevant Parameters
Klüber, V.; Bühler, L.; Mistrangelo, C.
2019. Proceedings of the 11th PAMIR International Conference, Fundamental and Applied MHD, Reims, F, July 1-5, 2019, 162–166
Numerical Investigation of Liquid Metal MHD Flow in Rectangular Channels under Inclined Magnetic Fields for Fusion Relevant Parameters
Klüber, V.; Bühler, L.; Mistrangelo, C.
2019. 11th PAMIR international Conference - Fundamental and Applied MHD (2019), Reims, France, July 1–5, 2019
Design of a Test Section to Analyze Magneto-Convection Effects in WCLL Blankets
Koehly, C.; Bühler, L.; Mistrangelo, C.
2019. Fusion science and technology, 75 (8), 1010–1015. doi:10.1080/15361055.2019.1607705
Numerical simulations of 3D magnetohydrodynamic flows in dual-coolant lead lithium blankets
Klüber, V.; Bühler, L.; Mistrangelo, C.
2019. Fusion engineering and design, 139. doi:10.1016/j.fusengdes.2019.01.055
Development of combined temperature – Electric potential sensors
Bühler, L.; Aiello, G.; Bendotti, S.; Koehly, C.; Mistrangelo, C.; Galabert, J.
2018. Fusion engineering and design, 136, 7–11. doi:10.1016/j.fusengdes.2017.12.004
Design of a test section to analyze magneto-convection effects in WCLL blankets
Köhly, C.; Bühler, L.; Mistrangelo, C.
2018. 23rd Topical Meeting on the Technology of Fusion Energy (TOFE 2018), Orlando, FL, November 11-15, 2018. Proceedings on USB-Stick, Paper No. 732–18
Design of a test section to analyze magneto-convection effects in WCLL blankets
Köhly, C.; Bühler, L.; Mistrangelo, C.
2018. 23rd Topical Meeting on the Technology of Fusion Energy (TOFE 2018), Orlando, FL, USA, November 11–15, 2018
Experimental confirmation of additional magnetohydrodynamic pressure drop at junctions between electrically insulating flow channel inserts
Bühler, L.; Brinkmann, H. J.; Koehly, C.
2018. MHD Days and GdRI Dynamo Meeting (2018), Dresden, Germany, November 26–28, 2018
Pressure-driven 3D liquid metal MHD flow in a dual-coolant lead lithium blanket for a fusion reactor
Klüber, V.; Bühler, L.; Mistrangelo, C.
2018. MHD Days and GdRI Dynamo Meeting (2018), Dresden, Germany, November 26–28, 2018
Experimental study of liquid metal magnetohydrodynamic flows near gaps between flow channel inserts
Bühler, L.; Brinkmann, H. J.; Köhly, C.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018
Fabrication of the thin-walled fusion blanket components like flow channel inserts by selective laser manufacturing
Köhly, C.; Neuberger, H.; Bühler, L.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018
Numerical simulations of 3D magnetohydrodynamic flows in dual-coolant lead lithium blankets
Klüber, V.; Bühler, L.; Mistrangelo, C.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018
Analyse des Stabilitätsverhaltens magnetohydrodynamischer Kanalströmungen. PhD dissertation
Arlt, T.
2018. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000085856
Evaluation of conservative and innovative manufacturing routes for gas cooled Test Blanket Module and Breeder Blanket First Walls
Neuberger, H.; Rey, J.; Hernandez, F.; Ruck, S.; Arbeiter, F.; Rieth, M.; Koehly, C.; Stratil, L.; Niewoehner, R.; Felde, A.
2018. 30th International Symposium on Fusion Technology (SOFT 2018), Giardini-Naxos, Italy, September 16–21, 2018
Pressure distribution in MHD flows in an experimental test-section for a HCLL blanket
Bühler, L.; Mistrangelo, C.; Brinkmann, H.-J.; Koehly, C.
2018. Fusion engineering and design, 127, 168–172. doi:10.1016/j.fusengdes.2018.01.007
Magnetohydrodynamic flows in liquid metal blankets for fusion reactors
Mistrangelo, C.; Bühler, L.
2017. Proceedings in applied mathematics and mechanics, 17 (1), 115–118. doi:10.1002/pamm.201710033
Turbulent and transitional sidewall jets in magnetohydrodynamic channels with a homogeneous magnetic field
Krasnov, D.; Boeck, T.; Bühler, L.
2018. Proceedings in applied mathematics and mechanics, 17 (1), 111–114. doi:10.1002/pamm.201710032
Instabilities and turbulence in magnetohydrodynamic duct flows
Krasnov, D.; Bandaru, V.; Bühler, L.; Boeck, T.
2018. NIC Symposium 2018, Jülich, February 22-23, 2018
Experimental investigation of MHD pressure losses in a mock-up of a liquid metal blanket
Mistrangelo, C.; Bühler, L.; Brinkmann, H.-J.
2018. Nuclear fusion, 58 (3), Art.Nr. 036012. doi:10.1088/1741-4326/aaa133
Combined experimental and numerical study of MHD flows in liquid metal blankets
Mistrangelo, C.; Bühler, L.; Brinkmann, H.-J.
2017. 7th International Conference on Magneto-Science (ICMS 2017), Reims, F, October 23-27, 2017. Proceedings on USB-Stick, Paper No O4, 22–23, Unversity
Instabilities in boundary layers in MHD duct flows
Bühler, L.; Arlt, T.; Chowdhury, V.; Mistrangelo, C.
2017. 7th International Conference on Magneto-Science (ICMS 2017), Reims, F, October 23-27, 2017. Proceedings on USB-Stick, Paper No KN2, S. 2–3
Simulations of turbulent magnetohydrodynamic duct flows with high-speed shear layers
Krasnov, D.; Boeck, T.; Bühler, L.
2017. 16th European Turbulence Conference, Stockholm, S, August 21-24, 2017
Combined experimental and numerical study of MHD flows in liquid metal blankets
Mistrangelo, C.; Bühler, L.; Brinkmann, H.-J.
2017. 7th International Conference on Magneto-Science (ICMS 2017), Reims, F, October 23-27, 2017
Instabilities in boundary layers in MHD duct flows
Bühler, L.; Arlt, T.; Chowdhury, V.; Mistrangelo, C.
2017. 7th International Conference on Magneto-Science (ICMS 2017), Reims, F, October 23-27, 2017
Development of combined temperature - electric potential sensors
Bühler, L.; Aiello, G.; Bendotti, S.; Koehly, C.; Mistrangelo, C.; Galabert, J.
2017. 13th International Symposium on Fusion Nuclear Technology (ISFNT), Kyoto, J, September 25-29, 2017
Fabrication Issues of Sandwich-Like Flow Inserts for Circular Pipes
Koehly, C.; Bühler, L.
2017. Fusion science and technology, 72 (4), 660–666. doi:10.1080/15361055.2017.1350477
Ceramic Breeder Materials
Laan, J. G. van der; Reimann, J.; Fedorov, A. V.
2016. Reference Module in Materials Science and Materials Engineering. Ed.: Saleem Hashmi, 1–63, Elsevier. doi:10.1016/B978-0-12-803581-8.00733-5
Instabilities in electrically driven rotating MHD layers
Mistrangelo, C.; Bühler, L.
2017. IOP conference series / Materials science and engineering, 228 (conference 1), 012004/1–10. doi:10.1088/1757-899X/228/1/012004
Magnetically induced instabilities in duct flows
Bühler, L.; Arlt, T.; Boeck, T.; Braiden, L.; Chowdhury, V.; Krasnov, D.; Mistrangelo, C.; Molokov, S.; Priede, J.
2017. IOP conference series / Materials science and engineering, 228, Art. Nr. 012003. doi:10.1088/1757-899X/228/1/012003
X-ray tomography investigations of mono-sized sphere packing structures in cylindrical containers
Reimann, J.; Vicente, J.; Brun, E.; Ferrero, C.; Gan, Y.; Rack, A.
2017. Powder technology, 318, 471–483. doi:10.1016/j.powtec.2017.05.033
The effect of finite-conductivity Hartmann walls on the linear stability of Hunt’s flow
Arlt, T.; Priede, J.; Bühler, L.
2017. Journal of fluid mechanics, 822, 880–891. doi:10.1017/jfm.2017.322
MHD phenomena related to electromagnetic flow coupling
Mistrangelo, C.; Bühler, L.
2017. Magnetohydrodynamics, 53 (1), 141–148
Influence of thin finite conducting walls on the linear stability of magnetohydrodynamic duct flow
Arlt, T.; Priede, J.; Bühler, L.
2017. Magnetohydrodynamics, 53 (1), 35–44
MHD flow and heat transfer in model geometries for WCLL blankets
Bühler, L.; Mistrangelo, C.
2016. Fusion engineering and design, 124, 919–923. doi:10.1016/j.fusengdes.2017.01.014
Magnetohydrodynamic flows in liquid metal blankets for fusion reactors
Mistrangelo, C.; Bühler, L.
2017. Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM 2017), Weimar, 6.-10.März 2017
Properties of turbulent and transitional electromagnetic boundary layers in channels with a uniform magnetic field
Krasnov, D.; Braiden, L.; Bühler, L.; Molokov, S.; Zikanov, O.; Boeck, T.
2017. Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM 2017), Weimar, 6.-10.März 2017
Influence of modifications of HCLL blanket design on MHD pressure losses
Mistrangelo, C.; Bühler, L.; Koehly, C.; Brinkmann, H.-J.
2017. Fusion engineering and design, 124, 948–952. doi:10.1016/j.fusengdes.2016.11.012
Magneto-convective flows in rectangular ducts with internal cylindrical obstacles
Mistrangelo, C.; Bühler, L.
2016. 17th MHD Days, Göttingen, November 30 - December 2, 2016
Experimentelle Untersuchungen von magnetisch induzierten Instabilitäten in MHD Kanalströmungen. PhD dissertation
Chowdhury, V.
2016. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000063154
Electrically coupled 3D MHD flows in manifolds for helium cooled lead lithium fusion blankets
Bühler, L.; Mistrangelo, C.
2016. 17th MHD Days, Göttingen, November 30 - December 2, 2016
Numerical investigation of magnetically induced instabilities
Arlt, T.; Priede, J.; Bühler, L.
2016. 17th MHD Days, Göttingen, November 30 - December 2, 2016
Theoretical studies of MHD flows in support to HCLL design activities
Bühler, L.; Mistrangelo, C.
2016. Fusion engineering and design, 109, Part B, 1609–1613. doi:10.1016/j.fusengdes.2015.11.010
Fabrication issues of sandwich-like flow channel inserts for circular pipes
Koehly, C.; Bühler, L.
2016. 22nd Topical Meeting on the Technology of Fusion Energy (TOFE 2016), Philadelphia, PA, August 22-25, 2016
Transition to turbulence in Hunt’s flow in a moderate magnetic field
Braiden, L.; Krasnov, D.; Molokov, S.; Boeck, T.; Bühler, L.
2016. epl, 115 (4), 44002. doi:10.1209/0295-5075/115/44002
Transition to turbulence in Hunt’s flow
Braiden, L.; Krasnov, D.; Molokov, S.; Boeck, T.; Bühler, L.
2016. Proceedings of the 10th PAMIR International Conference on Fundamental and Applied MHD, Cagliari, I, June 20-24, 2016, 27–31, University of Cagliari
Transition to turbulence in Hunt’s flow
Braiden, L.; Krasnov, D.; Molokov, S.; Boeck, T.; Bühler, L.
2016. 10th PAMIR International Conference Fundamental and Applied MHD (2016), Cagliari, Italy, June 20–24, 2016
Magnetohydrodynamic flow in ducts with discontinuous electrical insulation
Mistrangelo, C.; Bühler, L.
2015. Fusion engineering and design, 98-99, 1833–1837. doi:10.1016/j.fusengdes.2015.04.009
Experimental investgation of instabilities in Hunt-type MHD flows
Chowdhury, V.; Bühler, L.; Mistrangelo, C.
2016. Proceedings of the 10th PAMIR International Conference on Fundamental and Applied MHD, Cagliari, I, June 20-24, 2016, 145–149, University of Cagliari
Overview of MHD phenomena related to electro-magnetic flow coupling
Mistrangelo, C.; Bühler, L.
2016. Proceedings of the 10th PAMIR International Conference on Fundamental and Applied MHD, Cagliari, I, June 20-24, 2016, 136–140, University of Cagliari
Linear stability of magnetohydrodynamic flow in a square duct with thin conducting walls
Arlt, T.; Priede, J.; Bühler, L.
2016. Proceedings of the 10th PAMIR International Conference on Fundamental and Applied MHD, Cagliari, I, June 20-24, 2016, 155–159, University of Cagliari
Electro-magnetic flow coupling for liquid metal blanket applications
Mistrangelo, C.; Bühler, L.
2016. Fusion engineering and design, 109-111, Part B, 1452–1457. doi:10.1016/j.fusengdes.2015.11.052
Experimental investgation of instabilities in Hunt-type MHD flows
Chowdhury, V.; Bühler, L.; Mistrangelo, C.
2016. 10th PAMIR International Conference Fundamental and Applied MHD (2016), Cagliari, Italy, June 20–24, 2016
Overview of MHD phenomena related to electro-magnetic flow coupling
Mistrangelo, C.; Bühler, L.
2016. 10th PAMIR International Conference Fundamental and Applied MHD (2016), Cagliari, Italy, June 20–24, 2016
Linear stability of magnetohydrodynamic flow in a square duct with thin conducting walls
Arlt, T.; Priede, J.; Bühler, L.
2016. 10th PAMIR International Conference Fundamental and Applied MHD (2016), Cagliari, Italy, June 20–24, 2016
Influence of modifications of HCLL blanket design on MDH pressure losses
Mistrangelo, C.; Bühler, L.; Koehly, C.
2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prague, Czechia, September 5–9, 2016
MHD flow and heat transfer in model geometries for WCLL blankets
Bühler, L.; Mistrangelo, C.
2016. 29th International Symposium on Fusion Technology (SOFT 2016), Prague, Czechia, September 5–9, 2016
Electro-magnetic flow coupling for liquid metal blanket applications
Mistrangelo, C.; Bühler, L.
2015. 12th International Symposium on Fusion Nuclear Technology (ISFNT 2015), Jeju, Korea, September 14-18, 2015
Theoretical studies of MHD flows in support to HCLL design activities
Bühler, L.; Mistrangelo, C.
2015. 12th International Symposium on Fusion Nuclear Technology (ISFNT 2015), Jeju, Korea, September 14-18, 2015
MHD velocity jets driven by injected currents
Mistrangelo, C.; Bühler, L.
2015. 16th MHD Days, Ilmenau, December 7-9, 2015
Three-dimensional MHD effects due to discontinuous insulation in pipes and channels
Bühler, L.; Mistrangelo, C.
2015. 16th MHD Days, Ilmenau, December 7-9, 2015
Numerical investigation of magnetically induced instabilities
Arlt, T.; Bühler, L.; Priede, J.
2015. 16th MHD Days, Ilmenau, December 7-9, 2015
An approach to verification and validation of MHD codes for fusion applications
Smolentsev, S.; Badia, S.; Bhattacharyay, R.; Bühler, L.; Chen, L.; Huang, Q.; Jin, H. G.; Krasnov, D.; Lee, D. W.; Mas de les Valls, E.; Mistrangelo, C.; Munipalli, R.; Ni, M. J.; Pashkevich, D.; Patel, A.; Pulugundla, G.; Satyamurthy, P.; Snegirev, A.; Sviridov, V.; Swain, P.; Zhou, T.; Zikanov, O.
2015. Fusion engineering and design, 100, 65–72. doi:10.1016/j.fusengdes.2014.04.049
Experimental study of instabilities in magnetohydrodynamic boundary layers
Chowdhury, V.; Bühler, L.; Mistrangelo, C.; Brinkmann, H. J.
2015. Fusion engineering and design, 98-99, 1751–1754. doi:10.1016/j.fusengdes.2015.02.027
Facilities, testing program and modeling needs for studying liquid metal magnetohydrodynamic flows in fusion blankets
Bühler, L.; Mistrangelo, C.; Konys, J.; Bhattacharyay, R.; Huang, Q.; Obukhov, D.; Smolentsev, S.; Utili, M.
2015. Fusion engineering and design, 100, 55–64. doi:10.1016/j.fusengdes.2014.03.078
Thermo-mechanical screening tests to qualify beryllium pebble beds with non-spherical pebbles
Reimann, J.; Fretz, B.; Pupeschi, S.
2015. Fusion engineering and design, 98-99, 1851–1854. doi:10.1016/j.fusengdes.2015.04.046
Pebble bed structures in the vicinity of concave and convex walls
Reimann, J.; Brun, E.; Ferrero, C.; Vicente, J.
2015. Fusion engineering and design, 98-99, 1855–1858. doi:10.1016/j.fusengdes.2015.05.026
Magneto convective instabilities driven by internal uniform volumetric heating
Bühler, L.; Mistrangelo, C.
2015. Magnetohydrodynamics, 51 (2), 303–310
Validity of quasi-2D models for magneto-convection
Bühler, L.; Mistrangelo, C. M.; Molokov, S. Y.
2015. Magnetohydrodynamics, 51 (2), 321–327
Magnetohydrodynamic flows in model porous structures
Bühler, L.; Mistrangelo, C.; Najuch, T.
2015. Fusion engineering and design, 98-99, 1239–1243. doi:10.1016/j.fusengdes.2015.01.018
MHD issues related to the use of Lithium Lead eutectic as breeder material for blankets of Fusion power plants
Aiello, G.; Mistrangelo, C.; Bühler, L.; Mas de les Valls, E.; Aubert, J.; Li-Puma, A.; Rapisarda, D.; Del Nevo, A.
2015. Magnetohydrodynamics, 51 (2), 185–194
Characterization of structured and non-structured zones of pebble beds, results from recent microtomography experiments
Reimann, J.; Ferrero, C.; Vicente, J.; Rack, A.; Brun, E.; Gan, Y.
2015. Vortr.: University of California, Los Angeles, Calif., 7.Oktober 2015
MHD flow instability in ducts with conducting walls
Krasnov, D.; Braiden, L.; Molokov, S.; Boeck, T.; Bühler, L.
2015. 6th International Symposium on Bifurcations and Instabilities in Fluid Dynamics (BIFD 2015), Paris, F, July 15-17, 2015 Book of Abstracts
MHD instabilities in electrically driven rotating jets
Mistrangelo, C.; Bühler, L.
2015. 6th International Symposium on Bifurcations and Instabilities in Fluid Dynamics (BIFD 2015), Paris, F, July 15-17, 2015 Book of Abstracts
Experimental investigation of magnetically induced instabilities (A3)
Chowdhury, V.; Bühler, L.
2015. LIMTECH Summer School, Karlsruhe, June 30 - July 1, 2015
Experimental investigation of unstable magnetohydrodynamic boundary layers
Chowdhury, V.; Bühler, L.; Mistrangelo, C.; Brinkmann, H. J.
2015. EST 2015 - Energy, Science and Technology, Karlsruhe, May 20-22, 2015
Calibration of potential probes for measuring velocity profiles in liquid metal MHD duct flows
Chowdhury, V.; Bühler, L.
2015. 3rd International Workshop on Measuring Techniques for Liquid Metal Flows (MTLM 2015), Dresden, April 15-17, 2015
ARIES-ACT2 DCLL power core design and engineering
Wang, X. R.; Tillack, M. S.; Koehly, C.; Malang, S.; Toudeshki, H. H.; Najmabadi, F.
2015. (ARIES Team, Ed.) Fusion science and technology, 67, 193–219. doi:10.13182/FST14-798
ARIES-ACT1 system configuration, assembly, and maintenance
Wang, X. R.; Tillack, M. S.; Koehly, C.; Malang, S.; Toudeshki, H. H.; Najmabadi, F.
2015. (ARIES Team, Ed.) Fusion science and technology, 67, 22–48. doi:10.13182/FST14-797
The ARIES advanced and conservative tokamak power plant study
Kessel, C. E.; Tillack, M. S.; Najmabadi, F.; Poll, F. M.; Ghantous, K.; Gorelenkov, N.; Wang, X. R.; Navael, D.; Toudeshki, H. H.; Koehly, C.; El-Guebaly, L.; Blanchard, J. P.; Martin, C. J.; Mynsburge, L.; Humrickhouse, P.; Rensink, M. E.; Rognlien, T. D.; Yoda, M.; Abdel-Khalik, S. I.; Hageman, M. D.; Mills, B. H.; Rader, J. D.; Sadowski, D. L.; Snyder, B.; John, H. S.; Turnbull, A. D.; Waganer, L. M.; Malang, S.; Rowcliffe, A. F.
2015. Fusion science and technology, 67 (1), 1–21. doi:10.13182/FST14-794
MHD instabilities in boundary layers aligned with a magnetic field
Bühler, L.; Chowdhury, V.; Mistrangelo, C.; Brinkmann, H. J.
2015. 6th International Symposium on Bifurcations and Instabilities in Fluid Dynamics (BIFD 2015), Paris, F, July 15-17, 2015 Book of Abstracts